Aain 2 Ton Heavy Duty Floor Jack,Hydraulic Low Profile Trolley Service Floor Jack,Blue

Aain

  • $81.99
    Unit price per 
Shipping calculated at checkout.
Free shipping for all items Up to 150 lbs!

Only 504 left!
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13"
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability
  • The floor jack has a large saddle surface area for better contact with the load being supported
  • Heavy duty steel construction provides long term durability,Built-in safety valve provides overload protection
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning.
See more product details

From the manufacturer

 

Air Venting Procedures

Use only on hard, level surface capable of supporting the load.

Center load on saddle prior to lifting.

Support the vehicle with appropriate means immediately after lifting.

Do not move or dolly the vehicle while on the jack.

Lift only on areas of the vehicle as specified by the vehicle manufacturer.

With the jack in the fully lowered position, release valve open, remove oil filler plug.

Pump the handle rapidly several times. Reinstall oil filler plug.

Turn the handle/release valve clockwise to the closed position.

Pump the handle until the lift arm reaches maximum height and continue to pump several times to remove trapped air in the system.

Turn the handle/release valve counterclockwise in one full turn and lower lift arm to the lowest position. Use force on saddle if necessary.

Carefully and slowly loosen oil filler plug to release pressurized air.

Repeat above steps until trapped air is completely vented.

Assembly
If two piece handles are provided, assemble the upper section into the lower section, line up the holes, insert and tighten • Insert the bottom end of handle into handle fork and securely tighten the bolt and washer. Ensure the handle can turn freely.
Lifting

Turn the handle/release valve clockwise to the closed position. Do not over tighten.

Position the jack under the specified lift point.

Begin lifting by pumping the handle up and down.

Immediately after lifting, support the vehicle with appropriately rated jack stands.

Turn the handle/release valve slowly counterclockwise to lower the vehicle onto jack stands.

Lowering

Turn the handle/release valve clockwise to the closed position. Do not over tighten.

Pump the handle up and down to lift vehicle off jack stands.

Remove the jack stands. Do not get under or let anyone get under the vehicle while lowering.

Turn the handle/release valve slowly counterclockwise to lower the vehicle onto the ground.

Product Description

Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13" The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability The floor jack has a large saddle surface area for better contact with the load being supported Heavy duty steel construction provides long term durability,Built-in safety valve provides overload protection Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning.
Technical Details

Manufacturer Aain
Part Number AA51G
Item Weight 19.36 pounds
Package Dimensions 17 x 7 x 5 inches
Item model number AA51G
Style 2 Ton Floor Jack
Material Alloy Steel
Power Source Hand Powered
Item Package Quantity 1
Included Components Floor Jack
Batteries Required? No

We Also Recommend


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)